The Charges are to be deposited in advance through e-gras and service tax at prevailing rate through CBEC-EASIEST as applicable vide order No. DMG/S.chem.Engineer/F-1/78/Part-1/2014/849 dated 28.11.2014
| S.No. | Study Type | Rate in Rupees |
|---|---|---|
| 1. | Ore microscopic study. | 1400/- per sample |
| 2. | Thin section preparation & petrographic study | 1400/- per sample |
| 3. | Thin section preparation | 500/-per thin section |
| 4. | Cutting & polishing size up to 3"x3" | 700/- per piece |
| 5. | Determination of hardness by Mohs scale | 500/- per piece |
| 6. | Polished section preparation only size up to 3"x3" | 700/- per piece |
| S.No. | Type of Test / Experiment | Charges in Rupees |
|---|---|---|
| 1 | Water absorption/ porosity | 500 |
| 2 | Water of plasticity | 500 |
| 3 | Dry Shrinkage | 500 |
| 4 | Atterberg No | 500 |
| 5 | Bulk density | 400 |
| 6 | M.O.R. (Green) | 600 |
| 7 | M.O.R. (Fired) | 1000 |
| 8 | Resistance to Thermal shock of refractory | 1000 |
| 9 | Thermal shock of white wares | 800 |
| 10 | Fired characteristics (Vitrification) | 1000 |
| 11 | Washing to clay % recovery only | 800 |
| 12 | Particle size determination (Anderson Pipette) | 800 |
| 13 | Sieve analysis (Dry) | 500 |
| 14 | Sieve analysis (Wet) | 500 |
| 15 | Base exchange capacity | 1000 |
| 16 | Compounding of Ceramic bodies | 2200 |
| 17 | Washing of silica sand (% recovery only) | 800 |
| 18 | Melting characteristics | 1200 |
| 19 | Levigation of clay including (a)Washing of clay. (b)Sieving, (c)Water of plasticity. (d)Deflocculation characteristics. (e)Dry Shrinkage, (f)Atterberg No. (g)M.O.R. (Green), (h)Fired Characteristics (Vitrification), (i)Chemical analysis of 4 fractions | 6500 |
| 20 | Filter loss in bentonite | 600 |
| 21 | Gel value IS 6186 | 500 |
| 22 | Swelling index/power IS 6186 | 500 |
| 23 | pH determination | 500 |
| 24 | Simple ore dressing experiments | 20,000 |
| 25 | Determination of PLC (Shrinkage) of fire bricks with 5 hrs. soaking | 1000 |
| 26 | Determination of resistance to wear | 500 |
| 27 | D.T.A. upto IOOO°C | 1500 |
| 28 | T.G.A. upto IOOO C | 1500 |
| 29 | Sp. Gr. by R.D. Bottle | 500 |
| 30 | Sp. Gr. by Steelyard balance | 500 |
| 31 | Study on the acid activation of bentonite/fuller's earth including, (a) Analysis of crude clay (b) Treatment with 25%, 50%, 100% H2SO4 and HCL, (c) Followed by filtration, washing, dying, grinding etc., (d) Determination of pH of crude and 4 treated fractions, (e) Determination of bleaching characteristics of crude & treated product 5 fractions | 8000 |
| 32 | Study on the alkali activation of bentonite including, (a) Chemical analysis of crude clay, (b) Treatment with 5%,4%,3%,2%, 1%, Sodium carbonate solution at room temperature followed by drying, grinding etc., (c) Determination of pH 6 fractions, (d) Determination of Gel value 6 fractions, (e) Determination of Swelling index 6 fractions, (f) Determination of viscosity 6 fractions | 12000 |
| 33 | Plastic viscosity/yield point | 1000 |
| 34 | Determination of bleaching characteristics of activated Bentonite/ fuller earth | 1000 |
| 35 | Gloss or whiteness | 500 |
| 36 | Impact strength | 1000 |
| 37 | Compressive strength | 1000 |
| 38 | Compressive strength after freezing for 24 hours | 1200 |
| 39 | Tensile strength | 1000 |
| 40 | Decrepitation tests for Limestone/Dolomite | 1200 |
| S.No. | Name of Sample | Contents | Rate Per Sample (in Rs.) |
|---|---|---|---|
| 1 | Carbonate Minerals like Limestone,Dolomite,Calcite,Marble,Magnesite,etc. | (A) Complete analysis comprising of SiO2, A.In.Fe2O3, Al2O3, CaO, MgO, L.O.I. | 1000/- |
| (B) Part analysis for any one radical | 500/- | ||
| (C) For every additional radical | 250/- | ||
| 2 | Wollastonite | (A) Complete analysis comprising of SiO2, Fe2O3, Al2O3, CaO, MgO, L.O.I. | 1000/- |
| (B) Part analysis for any one radical | 500/- | ||
| (C) For every additional radical | 250/- | ||
| 3 | Rock Phosphate, Apatite. | (A) Complete analysis comprising of SiO2 + A.In., Fe2O3, Al203, CaO, MgO, L.O.I. & P2O5 | 1200/- |
| (B) Part analysis for any one radical | 600/- | ||
| (C) For every additional radical | 300/- | ||
| 4 | Gypsum. | (A) Complete analysis comprising of SiO2 ,+ A.Ins., Fe2O3 ,Al2O3, CaO, MgO, L.O.I., SO3 & H2O | 1200/- |
| (B) Part analysis for any one radical | 600/- | ||
| (C) For every additional radical | 300/- | ||
| 5 | Fluorite. | (A) Complete analysis comprising of SiO2, Fe2O3, CaCO3 & CaF2 | 1200/- |
| (B) Part analysis for anyone radical | 600/- | ||
| (C) For every additional radical | 300/- | ||
| 6 | Barytes. | (A) Complete analysis comprising of SiO2, Fe2O3, Al2O3, CaO, MgO, BaO, SO3, LOI | 1500/- |
| (B) Part analysis for any one radical | 750/- | ||
| (C) For every additional radical | 375/- | ||
| 7 | Manganese ore | (A) Complete analysis comprising of Mn, SiO2 ,Fe2O3 | 1000/- |
| (B) Part analysis for any one radical | 500/- | ||
| (C) For every additional radical | 250/- | ||
| 8 | Bauxite, Corundum or other mineral (oxide of aluminium.) | (A) Complete analysis comprising of Al203, SiO2, Fe2O3 TiO2, CaO, MgO, LOI | 1200/- |
| (B) Part analysis for any one radical | 600/- | ||
| (C) For every additional radical | 300/- | ||
| 9 | Silicate minerals like Clays, Feldspar, Serpentine Pyrophyllite, Soapstone, Laterite, Slate Stone, Yellow & Red Ochres, China Clay, Bentonite, Fire Clay, Fuller’s Earth, Mica etc. | (A) Complete analysis comprising of Al2O3, SiO2, Fe2O3 TiO2, CaO, MgO, LOI, Na2O, K2O | 1500/- |
| (B) Part analysis for any one radical | 750/- | ||
| (C) For every additional radical | 375/- | ||
| (D) Only Alkalies (Na2O & K2O) | 700/- | ||
| 10 | Silica minerals like Quartz, Quartzite, Silica Sand, Sand Stone, Siliceous Earth etc. | (A) Complete analysis comprising of SiO2 ,Fe2O3, Al2O3, CaO, MgO, LOI | 1200/- |
| (B) Part analysis for any one radical | 600/- | ||
| (C) For every additional radical | 300/- | ||
| 11 | Coal/Lignite/Graphite etc. | Proximate analysis. (Moisture, Volatile matters,Fixed Carbon & Ash.) | 600/- |
| (B) Ultimate analysis by CHNS Analyser (Carbon, Hydrogen, Nitrogen, or any one of them) | 1500/- | ||
| (C) Calorific Value. | 600/- | ||
| (D) Chemical analysis of lignite Ash or Coal Ash (SiO2, Fe2O3, Al2O3, TiO2, CaO, MgO, LOI, Na2O, K2O) | 1500/- | ||
| 12 | Iron Ore, Limonite, Rutile, Magnetite, Hematite, Siderite etc. | (A) Complete analysis Comprising of SiO2, Fe2O3, FeO, Al2O3, TiO2, P&S. | 1500/- |
| (B) Part analysis for any one radical | 750/- | ||
| (C) For every additional radical | 375/- | ||
| 13 | Wolframite | (A) Complete analysis Comprising of SiO2, WO3, Fe, Mn | 1500/- |
| (B) Part analysis for any one radical | 750/- | ||
| (C) For every additional radical | 375/- | ||
| 14 | Finished Product | Mineral Based Chemical Industry | 1500/- |
| 15 | Quick lime (Hydrated Lime) | Available lime CaO, Ca(OH)2 | 800/- |
| 16 | Soil, Organic Compound | (A) Carbon, Hydrogen, Nitrogen, Sulphur or any one of them by CHNS Analyser | 1500/- |
| (B) For every additional sample | 1000/- | ||
| 17 | Base Metal Ores | (A) Complete analysis Comprising of Pb, Zn, Cu, Fe, & Sulphur | 1000/- |
| (B) Part analysis for any one radical | 500/- | ||
| (C) For every additional radical | 250/- | ||
| 18 | Mineral Sample. | (A) Determination of Moisture | 500/- |
| (B) Matter Soluble in Acid / Alkali / Water per Sample per test | 600/- | ||
| 19 | Gold | (A) Au by Fire Assay method | 2000/- |
| (B) Au by M.I.B.K. method | 1000/- | ||
| 20 | Silver | (A) Ag by A.A.S. (Solution preparation Charge included) | 500/- |
| 21 | Soil and Water test | (A) For determination of pH, Conductivity, T.D.S., Dissolved Oxygen | 400/- |
| 22 | Metallic radicals By AAS | (A) For every radical (Pb, Zn, Cu, Ni, Co, As, Cd, Cr, Sb, Bi, Mn, Au, Fe, Li, etc | 200/- |
| (B) Solution preparation charges extra | 400/- | ||
| (C) For every radical. ( Sn, Al, W, Mo) | 500/- | ||
| (D) Solution preparation charges extra | 400/- | ||
| (E) For liquid sample for every radical of (A-Group) | 200/- |
| S.No. | Nature of Work | Rate in Rupees |
|---|---|---|
| 1. Pitting/Trenching (up to 3 m in depth) | ||
| i. | All types of rocks | Rs. 700/- cu. m. |
| 2. Drilling | ||
| i. | For all types of rock formation | 0.00m to 250m Rs. 8500/- per m. more than 250m. Rs 10200/- per m. |
| 3. Detailed Geological Mapping (1:2000) | ||
| i. | Upto 50 hectares | Rs. 60000/- |
| ii. | More than 50 hectares | Rs.1200/-per hectare or part there of |
| 4. Collection of Sample (Sampling) | ||
| i. | Chip sample | Rs. 100/- per sample |
| ii | Core sample | Rs. 100/- per sample |
| iii | Channel sample | Rs. 100/- per sample |
| iv | Bulk Sample | Rs.500/- per sample |
| v | Grab sample | Rs.500/- per sample |
| 5. Preliminary assessment of mineral resources in a lease hold/prospecting license area | ||
| Upto 50 hect. area | Rs. 30000/- upto 50 hect. | |
| Over 50 hect. | Rs. 10000/- per hect. or part there of | |
| 6. Report Writing | ||
| Upto 2 copies | Rs. 1000/- | |
| More than 2 copies | Rs. 3000/- per copy | |
| 7. Geological mapping (1:10000 scale) | ||
| (a) Upto 10 sq. km. | Rs. 1,00,000/- | |
| (b) More than 10 sq. Km. | Rs. 10,000 per sq.km. or part there of | |
| 8. Core logging | ||
| i | For all types of rocks | Rs. 100/- per m length |
| 9. Supervision fees | ||
| Supervision fees | 10% of total prospecting charges. | |
| 10. Service Charges | ||
| As per rate fixed by Government of India on total bill amount. | ||
Note:1- The same rate will be applicable for the Department exploration work carried out in LoI issued area.
